The retaining screw on this keeps loosening when I am using the tool. Typically it happens within 10-15 seconds of use. I then have to tighten with Allen key and go through the cycle again in 15 seconds. Extremely frustrating.
There are two things I have done sine this issue started. They may or may not be related.
- chafed the blade to a new erbauer blade. Unsure on what I had previously
- put a drop of 3 in 1 on the nut as it seemed rusty
Thanks in advance
There are two things I have done sine this issue started. They may or may not be related.
- chafed the blade to a new erbauer blade. Unsure on what I had previously
- put a drop of 3 in 1 on the nut as it seemed rusty
Thanks in advance