- Joined
- 26 Aug 2016
- Messages
- 6,833
- Reaction score
- 1,010
- Country
Hi all just a simple question i hope
Usually to cut blocks i use a chunky pencil to mark and a handheld angle grinder to score each side and a bolster to snap.
Now I have the tarmac medium blocks https://www.wickes.co.uk/Medium-Dense-Block---7-3N-100mm/p/166860
However pencil doesn't show up so it's hard to cut accurately enough. Not to mention i am constantly sharpening it.
So one question is how to mark blocks, and the next is how to cut blocks to length efficiently.
Thanks in advance!
Usually to cut blocks i use a chunky pencil to mark and a handheld angle grinder to score each side and a bolster to snap.
Now I have the tarmac medium blocks https://www.wickes.co.uk/Medium-Dense-Block---7-3N-100mm/p/166860
However pencil doesn't show up so it's hard to cut accurately enough. Not to mention i am constantly sharpening it.
So one question is how to mark blocks, and the next is how to cut blocks to length efficiently.
Thanks in advance!