Hi all,
I could do with some help please. This boiler has been a useless piece of kit and constantly troublesomble from the day it was installed. However, many years on, it's still in place but hasn't been used for the last 2 years. After firing it up, the fan started up and after ignition you can hear a very unstable flame then after a few minutes shuts off with the reset button glowing. This happened a couple of times and now the fan starts but no flame/ignition can be heard. Oil is present at pump inlet and flowing freely. I have checked the pump filter and it looks clean. I am guessing a problem with the oil pump but could do with some expert opinions. Solenoid? PhotoCell? Can the pump be dismantled and cleaned?
Burner is Electro Oil B9
Oil Pump: Danfoss BFP41
Any help would be most appreciated.
I could do with some help please. This boiler has been a useless piece of kit and constantly troublesomble from the day it was installed. However, many years on, it's still in place but hasn't been used for the last 2 years. After firing it up, the fan started up and after ignition you can hear a very unstable flame then after a few minutes shuts off with the reset button glowing. This happened a couple of times and now the fan starts but no flame/ignition can be heard. Oil is present at pump inlet and flowing freely. I have checked the pump filter and it looks clean. I am guessing a problem with the oil pump but could do with some expert opinions. Solenoid? PhotoCell? Can the pump be dismantled and cleaned?
Burner is Electro Oil B9
Oil Pump: Danfoss BFP41
Any help would be most appreciated.