Baxi back boiler.central heating okay...have replaced clock programmer.have replaced thermostat on water tank.checked pump okay via central heating.checked burner okay via central heating.switch hot water on at programmer,red light comes on as normal.that is as far as it gets.have had no previous problems with it in the past...Could it be the electronic valve near the tank or could it be something electronic inside the fire perhaps...Thankyou in advance for any help.....all ancillaries are honeywell..
NO HOT WATER(HELP PLEASE)
- Thread starter shagjax
- Start date
has the valve got two ports on it or three.
is there 2 pipes or3 pipes coming of it
sounds like a pipe stat. is hot water run off gravity
could be loose wire in clock .is boiler fireing at all when cylinder is cold.
what temp is cyl stat set at.
cant under stand why you have pipe stat. you say you changed stat on cyl. do you mean the stat on the immersion or is there one strapped to side of cyl about quarter of the way up.
possibly loose wire. you seem to have changed a lot of electrical components.check all wireing.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
