Really? You know what the fault was?https://amzn.eu/d/085ZOhdj, 2 minute job you can do yourself.
Really? You know what the fault was?https://amzn.eu/d/085ZOhdj, 2 minute job you can do yourself.
before the CU is changed, I'm debating changing the wire myself, just worried with something this old, it still won't safely isolate or something.flipping the big main switch won't reset anything on those mate, they're old-school fuse carriers with wire inside that burns through when there's a fault. you'll need to turn the main switch off first before touching anything, then pull the lighting carrier out to inspect the wire. 9 times out of 10 with lights it's just a blown bulb that popped the 5 amp fuse wire, but definitely make sure the power is isolated at the main switch before you pull it.

Turn off the main switch, pull the fuse and fit a piece of 5 amp fuse wire.I
before the CU is changed, I'm debating changing the wire myself, just worried with something this old, it still won't safely isolate or something.
More like 20 years, TLC were listing the OPs consumer unit as current stock in 2004 and clearance stock in 2010.Don't know when the Wylex fuse box was discontinued, but likely some 30 or more years ago.


I know I had one in my house built 1980, and I renewed all the fuses for MCB's and added a second one of same design, both fed from an adaptable box with two RCDs fitted, added around 1990, the second box came from my father-in-law when he upgraded his house to a more modern consumer unit.More like 20 years, TLC were listing the OPs consumer unit as current stock in 2004 and clearance stock in 2010.
sold on cards to break it while tightening the screws, I would have spare holders pre-wired, for a quick change, and putting them in with the power on could cause damage
so all ways turn off isolator first. There was a cartridge fuse version, 
He said I'd have to go 2nd hand though.

I would prefer just having normal switches sorted, what a pain, I guess I need a new unit.

in the old days of tungsten lamps, they could fail with a flash, which was ionisation of the gas in the bulb, and this could cause a fuse to rupture or a trip to open,
9 times out of 10 with lights it's just a blown bulb that popped the 5 amp fuse wire,
It's very common for the light cluster candle bulbs (3+) to go and pop the fuse,
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local