Old junction boxes in two plate wiring / power sockets

Joined
15 Feb 2008
Messages
251
Reaction score
10
Country
United Kingdom
IMG_6978.jpeg
I’ve quite an old bungalow and I’ve noticed as I’m changing the old and various ceiling light fittings that the roses only have one wire.
The age of the property and absence of a Neutral at switch suggests a ‘two plate’ system.
Similarly, my power sockets (that I’ve changed so far), only have single wires and first I assumed they were spurs.
In the loft I have two large connection/junction boxes - I assume one for the lights and one for the power sockets; I’ve added a picture below.

I’ve no idea if this is ‘normal’ for age of the property; it was likely re-wired in 1950s and I suspect these dusty old boxes haven’t been disturbed in years.
Should I get them inspected and/or change to a modern connector box.

I’ve recently extended the property and had some additional wiring added; cooker, sockets, lights etc.
The work included a new consumer unit and the necessary testing, certification and notification; everything tested okay.

Thanks D
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top