- Joined
- 15 Feb 2008
- Messages
- 251
- Reaction score
- 10
- Country

The age of the property and absence of a Neutral at switch suggests a ‘two plate’ system.
Similarly, my power sockets (that I’ve changed so far), only have single wires and first I assumed they were spurs.
In the loft I have two large connection/junction boxes - I assume one for the lights and one for the power sockets; I’ve added a picture below.
I’ve no idea if this is ‘normal’ for age of the property; it was likely re-wired in 1950s and I suspect these dusty old boxes haven’t been disturbed in years.
Should I get them inspected and/or change to a modern connector box.
I’ve recently extended the property and had some additional wiring added; cooker, sockets, lights etc.
The work included a new consumer unit and the necessary testing, certification and notification; everything tested okay.
Thanks D