Hi everyone, I'm new to this forum but desperately need your help. I have an optima 2 plus house alarm. The pie cable to the garage has been problematic and the cable outside weathered. I always omit this zone but simply want it permanently disconnected. I have opened the main white box and fully removed the pir wired to my garage. The zone for this is now flashing and I cant turn my alarm back on to use. How do I completely tell the system that this zone no longer exists. Any help Would be realy appreciated.
optima 2 plus. house alarm.....permanent removal of a pir.
- Thread starter chamb1972
- Start date
Sponsored Links
Put a wire link in the zone where you removed it from!
Thank-you sparkymarka,
just wondering how I put the wire link in and in which part. I know the zone Where I unscrewed it from. But which one do I. Link. Is it 1 or 2 or more wire links. Sparkymarka, Your a star mate.
just wondering how I put the wire link in and in which part. I know the zone Where I unscrewed it from. But which one do I. Link. Is it 1 or 2 or more wire links. Sparkymarka, Your a star mate.
Ha, he's only a spark, hence the name
Sponsored Links
Two links one in the zone and one in the tamper loop .
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
