Hi all,
Hope someone can help me out with this. Changed about 10 switches/sockets in my kitchen with no problems except for this one!
There is an intermediate switch in the kitchen that controls the outdoor security lamp. I'm positive i copied the wires as the were but the problem is it seems the lamp is always on. The motion sensor turns the actual bulb on and off - but if the bulb is on and i flick the switch it doesn't do anything.
I've posted my ms paint masterpiece of how it's hooked up. Can anyone see anything obvious that I am missing? I think the black with red sleeve is a switched live from the light but i'm confused as to whats wrong.
"Same cable" means the red and black cores from one grey cable. The 2 earths are twisted together and in the earth terminal.
Hope someone can help me out with this. Changed about 10 switches/sockets in my kitchen with no problems except for this one!
There is an intermediate switch in the kitchen that controls the outdoor security lamp. I'm positive i copied the wires as the were but the problem is it seems the lamp is always on. The motion sensor turns the actual bulb on and off - but if the bulb is on and i flick the switch it doesn't do anything.
I've posted my ms paint masterpiece of how it's hooked up. Can anyone see anything obvious that I am missing? I think the black with red sleeve is a switched live from the light but i'm confused as to whats wrong.
"Same cable" means the red and black cores from one grey cable. The 2 earths are twisted together and in the earth terminal.