- Joined
- 19 Jan 2021
- Messages
- 10
- Reaction score
- 0
- Country
I'm currently fitting a new kitchen I have removed my old range cooker that was fed from a 10mm t+e cable 32a mcb to a 45amp isolater then 6mm t+e to the cooker.
I'm now wanting to fit
A induction hob 7400w (30.83amp) ?
A single oven 3450w (14.375amp) ?
My question is can I use the existing circuit for both of my new appliances?
I'm thinking I can put a 45mcb on the existing 10mm cable but then how can I split this at the cooker switch and allow for the 16amp oven ?
Or is it a case of getting a new dedicated circuit for the oven installed and use the existing for the hob ?
I'm now wanting to fit
A induction hob 7400w (30.83amp) ?
A single oven 3450w (14.375amp) ?
My question is can I use the existing circuit for both of my new appliances?
I'm thinking I can put a 45mcb on the existing 10mm cable but then how can I split this at the cooker switch and allow for the 16amp oven ?
Or is it a case of getting a new dedicated circuit for the oven installed and use the existing for the hob ?