Guys, just changing a PIR and a bit confused over what goes where on the new pir... ok the old one and the alarm was working fine but the pir was old and discoloured so I take it off and ready to fit the new one..tamper swith sets off alarm but reset ok ,,,here is the wiring termination on the old one left to right
1 says t amp ........BLUE wire
2 says N.C............WHITE wire
3 says +vin ..........RED wire
4 says gnd.............BLACK wire
5 says rly..............GREEN wire
6 says N.C.............YELLOW wire
new pir has this layout
1......T
2......T
3/4....N/C
5......-
6.....+
If you could tell what colour wires go where.. Thanks
1 says t amp ........BLUE wire
2 says N.C............WHITE wire
3 says +vin ..........RED wire
4 says gnd.............BLACK wire
5 says rly..............GREEN wire
6 says N.C.............YELLOW wire
new pir has this layout
1......T
2......T
3/4....N/C
5......-
6.....+
If you could tell what colour wires go where.. Thanks