Potterton Puma 80e Control Panel Problem

[musec]

Hello,

All the lights on the control panel of my combi heater have gone out - mains, flame, low pressure system and lockout. If the pilot light needs restarting I would also appreciate info on that. The fuse is fine, so I've ruled that out as a cause.

What I'd like to know is can I sort this myself or am I looking at having to call in a plumber?

Regards,

Clint

 

[kevplumb]

If the pilot light needs restarting I would also appreciate info on that.

80e hasn't got a perm pilot

All the lights on the control panel of my combi heater have gone out

check the fuse on the pcb

 

[chrishutt]

If you have a manual, you could follow through the basic stages of the fault finding section. It's probably something simple - an overheat stat that needs resetting, a fuse gone on the boiler, a poor electrical connection. The checks you need to make are primarily electrical so you need to know how to safely check for live voltage.

 

[corgigazza]

Possible pcb faulty. The top left hand plug on pcb, burns out and will spark if the plug is wiggled.
p.s be careful as this can also cause a fire if not repaired