anyone know how you get the pins out of these plugs please.
http://uk.farnell.com/rema/95505-01/320a-plug-with-70mm-contacts/dp/1122525
http://uk.farnell.com/rema/95505-01/320a-plug-with-70mm-contacts/dp/1122525
rema plugs
- Thread starter 333rocky333
- Start date
Fork charger?
I have fitted a few of these and they are one shot - Lug the pins to the cable and the cover clips over for good.
Not sure if other makes are openable.
I have fitted a few of these and they are one shot - Lug the pins to the cable and the cover clips over for good.
Not sure if other makes are openable.
Yes fork lift
Thanks the other make ones did have removable pins, but couldnt suss the rema one out, they just wanted a temporary tape up repair where the cable had split, till the fork lift engineer came.
Thanks the other make ones did have removable pins, but couldnt suss the rema one out, they just wanted a temporary tape up repair where the cable had split, till the fork lift engineer came.
According to the diagram in the datasheet it's held together with screws.
the only two visible screws i could see on the plug, secured the double sided cable clamp, removed them but pins were still secure, thanks for looking though
Edit
Didnt see that diagram last night, its part number 5 that pulls out, when pushed home it slides into the pin slots to secure them, i tried digging that bit out as well, there must be a nack to getting it out,
Edit
Didnt see that diagram last night, its part number 5 that pulls out, when pushed home it slides into the pin slots to secure them, i tried digging that bit out as well, there must be a nack to getting it out,
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
