Removing a tile

[swampydrill]

I want to change the architrave around my kitchen door, trouble is the new stuff is a bit bigger than the old so i would need to take 3 tiles off, trim them and then put them back on, is there an easy way of doing this.

 

[big-all]

easier to groove the back of the archatrave to fit the tiles assuming your talking around 9mm
unless you have several spare tiles removing tiles is very hit and miss with 50% breakages normal

 

[gcol]

Either do what big-all recommends or you can, using a dimond blade in an angle grinder, make the cut with the tiles in situ then just pick off the bit of tile you don't need.

 

[hawthorns]

i had the same problem and i did what big -all recommends its the easiest way