Repositioning of hot water cylinder etc

[richard7761]

Currently, the hot water cylinder is in it's own cupboard space (sat on the floor) along with 3 remote-controllable valves and the cold water tank above the cylinder. So, I have a combi boiler setup.

Okay, I simply wish to move the cylinder, along with the valve-set and the cold water tank out of the cupboard space and into the corner of a bedroom. Basically, moving the whole caboodle about 4 feet right into the bedroom corner.

Of course, I need to build a new cupboard/housing in the bedroom.

Are there any specifications I need to comply with? Thanks. Rich

 

[ALCPlumbing]

Not really but why do you have a cylinder with a combi boiler?

 

[richard7761]

As far as I can tell, if I simply copy what I see in the cupboard space, I'll be fine.

 

[richard7761]

Not really but why do you have a cylinder with a combi boiler?

I'm thinking I have a combi boiler because the boiler can heat the home, or the cylinder, or both.

 

[richard7761]

I think there is one thing to watch out for: Where the cupboard space is will be the floor of a shower. Seems wise not to have the central heating piping be under that shower floor. Other than that, I should be okay moving things. I think.