The glovebox on my 3 series BMW stopped working and after getting it open and taking off the handle I found that a couple of wirings have become detached.
It's the two brown wires (one has a purple strip) that have become detached from the small switch box that sits on the handle side.
My problem I not sure wire should be soldered onto which terminal or if it matters?
Any advice? Cheers[/b]
It's the two brown wires (one has a purple strip) that have become detached from the small switch box that sits on the handle side.
My problem I not sure wire should be soldered onto which terminal or if it matters?
Any advice? Cheers[/b]