right type of silcone

[stayclean]

changing some misted up glass units no more than 300 mm sq, is it possible wrong silcone could have been used in the first place, if so what the correct 1 to use

any help would be appreciated

 

[wms]

The correct silicon to use is low mod neutral cure. as if you use high mod or assatoxic cure the assertones can damage the perimeter seal to a double glazed unit.

 

[stayclean]

thanks for your reply
can you recommended any
tyou

 

[stayclean]

would everbuild 335 construction silcone be ok

 

[chappers]

Not 100% sure but don't think so , I believe that 335 is a reactive cure.

 

[RigidRaider]

Like he wrote above.

You need to ask the shop for low-modulus because the acetone in the high-modulus stuff will attack the sealing system on your glazing unit. Low modulus takes a long time to go off though.