- Joined
- 6 Mar 2009
- Messages
- 179
- Reaction score
- 4
- Country

Have had a leak from a shower screen which a tenant had very helpfully partially-siliconed to the bath and hinge after throwing the seal away - it has rotted the bottom corner of the frame, the bottom of the stud upright and the cover piece (pictures attached), and the wood is still very wet further up.
What’s going to be the simplest way to repair this without dismantling the whole shower stud wall - should I be looking to splice in new timber, or would an epoxy filler work?
What’s going to be the simplest way to repair this without dismantling the whole shower stud wall - should I be looking to splice in new timber, or would an epoxy filler work?
