Yes. The way the multimeter is set up in the above photo looks fine. See what current reading is obtained with this. If it is 0 or less than 0.2 then change to the 200mA range, remembering to plug the red lead in to the next socket down.
To provide a feel for the significance of the measured current here. Drawing an average of 200mA from a 20Ah battery would take it from fully charged to flat in approximately 4 days.
To provide a feel for the significance of the measured current here. Drawing an average of 200mA from a 20Ah battery would take it from fully charged to flat in approximately 4 days.