- Joined
- 27 Apr 2008
- Messages
- 9,475
- Reaction score
- 899
- Country
Hi folks, I'm just wondering if my double oven range cooker should really be supplied using 22mm instead of the 15mm it currently has?
While being only a few feet away from the meter, the pipe seems to go from the meter (22mm) upstairs, along a meter or two then down in 15mm to the cooker (its in an old chimney hole) for about 4m.
I'm wondering if this would make the gas pressure too low?
No gas cooker has really cooked to the recommended times, always taking longer so am wondering if it may have low pressure causing this.
While being only a few feet away from the meter, the pipe seems to go from the meter (22mm) upstairs, along a meter or two then down in 15mm to the cooker (its in an old chimney hole) for about 4m.
I'm wondering if this would make the gas pressure too low?
No gas cooker has really cooked to the recommended times, always taking longer so am wondering if it may have low pressure causing this.