Been trying to fit these for a chain to go around in my garage. It says 16mm masonry bit but it was so tight when I hammered it in it bent at top and couldn't screw alway down, FAIL. Then next attempt I whirled drill around to widen hole, worked on first hole but too loose on second.
Do I need 17mm bit? Or is it all the dust falling down. These anchor things also seem to come apart easily, bottom bit which holds it together comes off
Do I need 17mm bit? Or is it all the dust falling down. These anchor things also seem to come apart easily, bottom bit which holds it together comes off
Last edited: