- Joined
- 12 May 2007
- Messages
- 292
- Reaction score
- 2
- Country
I have fitted a new radiator which is slightly smaller than the old one, to take up the differance i bought a telescopic fitting that screwed into the radiator and mated up to the radiator valve, by the time the rubber o ring on the end of the fitting mates up the the radiator valve the nut is only 1/2-3/4 done up, but tight,trouble is with the nut tight water is leaking out of the telescopic connection, also you can move the radiator slightly, is this a dodgy telescopic fitting or is there something i am doing wrong.