I think I know the answer to this one - that I need a new keypad but thought i'd check.
The keypad display is showing up as garbled on the 2nd line, and the number 6 isn't working. I was moving the keypad to another location, and I think i might have accidentally touched the live (red) wire of the alarm cable onto the PCB. I suspect this has caused a short somewhere, but wanted to double check.
Taking the power off and on does the same thing. Panel is 24 Elite and is in engineer mode.
Cheers
The keypad display is showing up as garbled on the 2nd line, and the number 6 isn't working. I was moving the keypad to another location, and I think i might have accidentally touched the live (red) wire of the alarm cable onto the PCB. I suspect this has caused a short somewhere, but wanted to double check.
Taking the power off and on does the same thing. Panel is 24 Elite and is in engineer mode.
Cheers
Last edited: