Timber 1st floor extension over outer leaf?

[stb654]

Hi all,
Is it possible to build a 1st floor wall of timber where the sole plate is positioned over the external leaf of brickwork, rather than inner leaf, in a cavity wall? What would go underneath to spread this load? (if possible).

Essentially to make more room internally and also have the cladding positioned further outward.
Thanks.

 

[^woody^]

Yes as long as it detailed properly to allow the frame to be strapped down.

The frame sits on a sole plate

 

[stb654]

Cheers Woody!

 

[A_Novice]

We did this but only had a single leaf on the ground floor to start with. It hasn't fallen down yet.