Two channel programmer with thermostat?

[Classic40]

Hi,

Does anyone know of any two channel programmer with thermostat but the Sunvic SunPro2000 - http://www.sunvic.co.uk/products/programmers-timers/sunpro2000/ ?

I am looking to replace my NewElec two channel programmer and salus rt300 rf with one unit.

Thanks.

 

[mogget]

Drayton MiTime RF pack 2?

Not an all in one unit, but a very nice twin channel programmer with wireless room stat.

 

[Classic40]

It needs to be an all in one unit.

I do like the look of the drayton unit but it's not suited to my need which is a shame.

Anyone else know of an all in one unit?

 

[D_Hailsham]

It needs to be an all in one unit.

Why?

 

[mogget]

I can't imagine the reason, but - Danfoss TP9000?

I used to have a TP9 and it was OK but not fantastic. Neither is Sunvic, mind. But the 9000 is the new model and may be better.

 

[Ihavenojob]

check out hive from BGas, it does heating & hot water & can be used remotely as we'll.

 

[Classic40]

Would love to get the hive system but don't have £200 to spend on it.

The main problem I have is the programmer is in the airing cupboard, it's annoying that when the CH timer goes off I have to go upstairs to put it on for another hour etc. Same thing with the HW too.

My plan is to remove the programmer and thermostat rf unit and run a 5 core cable into my hall way (only around 3 meters of cable)

TP9000 looks good and they are plenty of cheap units.

The thing I liked about the SunPro200 was the frost stat built in and big led display.

Has anyone got anything to say about the TP9000?

 

[Classic40]

Hi,

To keeps the costs down I have just ordered some new cable and I am going to move the programmer to a more suitable place and keep the same setup.

Thanks everyone.