type ofthe system
- Thread starter jaf
- Start date
- Joined
- 11 Jan 2004
- Messages
- 45,872
- Reaction score
- 3,517
- Country
Look in the CU (isolate first!!) to see if there are two conductors connected to the mcb.
If there are, with power still off, split these conductors and their associated neutrals and earths. Use a Multimeter set to continuity and put one probe on each of the lives/ neutrals/earths. If you get continuity it is likely(though not guaranteed!) to be a ring.
This test is a starting point, at least.
If there are, with power still off, split these conductors and their associated neutrals and earths. Use a Multimeter set to continuity and put one probe on each of the lives/ neutrals/earths. If you get continuity it is likely(though not guaranteed!) to be a ring.
This test is a starting point, at least.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
