Unvented cylinder on chipboard?

[Doggit]

Plumbers on a free forum... are just the same as everyone else here... we are not financially contracted to put up with any kind of bullschit!

Unless it our own brand of bullschit of course; then we're financially contracted to dish it out left right and centre.

 

[Gerorge Standers]

It's not advice.

Yes it is advise you moron! If I had big heavy weight in my loft which I was worried about I'd immediately check if what had been done was:

1. against reg
2. even if not come to arrangement with installer if possible
3. reinforce it myself.

I gave advise on all 3.

1. I said it probably is within regulations because massive housebuilders do it
2. Talk to the supplier and try to come to an arrangement
3. Reinforce - for which I gave advice how to do..

None of you gave anything at all!

 

[Dan Robinson]

Why does it need reinforcing when the pipes will hold it up?

 

[Gerorge Standers]

Because of the space mice m8

 

[dilalio]

Unless it our own brand of bullschit of course; then we're financially contracted to dish it out left right and centre.

I think you misunderstood my point @Doggit.

 

[Doggit]

I think I got what you were trying to tell someone, but I thought I'd put a bit of spin on it as well.

 

[AGAS]

e.g put some noggins between the joist members under the tank. This does involve removing part of the ceiling though.

fooking imbecile taking the ceiling down will probably cost just as much doing it properly

 

[Dan Robinson]

Care in the community at its finest

 

[ianmcd]

Nice one steel I love it