- Joined
- 20 Sep 2020
- Messages
- 5
- Reaction score
- 0
- Country
HI,
I bought the house with alarm installed Veritas R8. Upstairs keypad haven't respond to anything. So i mess around with programming but keypad starts working. But after week or so i had few false alarms but only from keypads. So i decided to cut the power(remove wire from battery, remove fuse) then everything looks like I've done factory reset. This time I only change the user code and engineering code but both keypads still working. After few days false alarms comes back. So I've done few factory resets but doesn't helps. False alarms coming back all the time. I've check manual and there is information how I should change setting on DIP switch, but I havent found one. I put engineering code,Prog, 09, (shows red dot on number 1 and 4)Prog, Reset and error tone can be heard.
I don't know what should I do to get rid off those false alarms from keypads. Anyone can help?
Thanks
I bought the house with alarm installed Veritas R8. Upstairs keypad haven't respond to anything. So i mess around with programming but keypad starts working. But after week or so i had few false alarms but only from keypads. So i decided to cut the power(remove wire from battery, remove fuse) then everything looks like I've done factory reset. This time I only change the user code and engineering code but both keypads still working. After few days false alarms comes back. So I've done few factory resets but doesn't helps. False alarms coming back all the time. I've check manual and there is information how I should change setting on DIP switch, but I havent found one. I put engineering code,Prog, 09, (shows red dot on number 1 and 4)Prog, Reset and error tone can be heard.
I don't know what should I do to get rid off those false alarms from keypads. Anyone can help?
Thanks