ok first off im not a spark but some advise would be good,
my problem is my flat intercom system has no power going to it look at pic 1
the red and black have no power going to them and they go to this old henley fuse box
its the thin wires on the right hand side
the problem is what is behind the fuse and is it safe to unscrew it ?
all i says is 400v henley and there is no other way of isolating the power before removing the fuse.
all help will be appreciated thanks.
my problem is my flat intercom system has no power going to it look at pic 1
the red and black have no power going to them and they go to this old henley fuse box
its the thin wires on the right hand side
the problem is what is behind the fuse and is it safe to unscrew it ?
all i says is 400v henley and there is no other way of isolating the power before removing the fuse.
all help will be appreciated thanks.