- Joined
- 8 Nov 2014
- Messages
- 11
- Reaction score
- 0
- Country
I'm hoping someone can offer some help. I have a Visonic Powermaster system with some MP-802 motion detectors. It was fitted a couple of years ago and has worked fine for the most part ever since, apart from the fact that one of the detectors first popped up with a replace battery message after about 18 months and since then it has gone through one battery every three months (when they should last years). All of the other detectors are still on their original batteries.
I have checked the signal several times (always says strong) and that the device settings are the same as the other devices.
Any ideas what is wrong or would I just be best to assume it is faulty and replace it with a new one?
Appreciate any advice.
I have checked the signal several times (always says strong) and that the device settings are the same as the other devices.
Any ideas what is wrong or would I just be best to assume it is faulty and replace it with a new one?
Appreciate any advice.