Hi,
I have a vokera compact 28 that wont power on, i've replaced the fuse on the spur but suspect the PCB may be gone. I've taken it out and reconnected everything but no power still.
Do i just need to check there is current arriving at the board ?
The fuse on the PCB seems to be ok still as no evidence of the filament breaking
Anything else to consider here ?
thanks in advance,
Mike.
I have a vokera compact 28 that wont power on, i've replaced the fuse on the spur but suspect the PCB may be gone. I've taken it out and reconnected everything but no power still.
Do i just need to check there is current arriving at the board ?
The fuse on the PCB seems to be ok still as no evidence of the filament breaking
Anything else to consider here ?
thanks in advance,
Mike.