I'm planning to install a brick light in a yet to be built front garden wall, which will be double thickness.
Im planning to use swa cable from the house to a suitable IP rated junction box, fixed to the inner wall (i.e. soil side) then suitable rubber flex or flat t&e from the JB through the wall to the unit.
Would use swa gland at the jb.
Anyone know if this is ok or a better method I should use?
Many thanks
Im planning to use swa cable from the house to a suitable IP rated junction box, fixed to the inner wall (i.e. soil side) then suitable rubber flex or flat t&e from the JB through the wall to the unit.
Would use swa gland at the jb.
Anyone know if this is ok or a better method I should use?
Many thanks