Please see the two photos below, the first photo is of the kitchen light wiring from one switch and the second photo is the hallway lights from another separate switch.
I want to connect these both to a 2 gang switch so each switch controls one of the lights independently.
The kitchen lights work fine currently (1st photo) but the hallways lights do not (2nd photo), the switch reads 0 on the multimeter as my assumption is that it's not connected to any circuit after the builders took down the partition wall.
Any advice appreciated on how to wire these up!
Thanks
I want to connect these both to a 2 gang switch so each switch controls one of the lights independently.
The kitchen lights work fine currently (1st photo) but the hallways lights do not (2nd photo), the switch reads 0 on the multimeter as my assumption is that it's not connected to any circuit after the builders took down the partition wall.
Any advice appreciated on how to wire these up!
Thanks