The bore looks too big for for a grinder it looks more like 30mm for a circular saw
Is there a tool that will allow me to...
- Thread starter simoncollins48
- Start date
Sponsored Links
That blade for a 9" grinder looks like an accident waiting to happen to me. Can you imagine the kickback off it if it jammed! Crazy!
I was going to say about the Arbortech, but I can see someone already did. you can get them from Axminster. They do a guard for them as well. Never used one, but they seem safe enough if used properly.
Nine times out of ten, and again as already suggested, for a "one off" job a hand saw and a bit of elbow grease are going to be as fast as mucking about trying to get a power tool to do the job.
I was going to say about the Arbortech, but I can see someone already did. you can get them from Axminster. They do a guard for them as well. Never used one, but they seem safe enough if used properly.
Nine times out of ten, and again as already suggested, for a "one off" job a hand saw and a bit of elbow grease are going to be as fast as mucking about trying to get a power tool to do the job.
I agree ,the catch with the arbor tec is it comes so well guarded it is almost non functional and the clear plastic guard must be removed, the safety level is down to the level of ordinary grinding operations
Sponsored Links
Its the 115mm version which is why the hole looks big.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
