Removing a toilet siliconed to the wall?

Status
Not open for further replies.
Joined
30 Jan 2016
Messages
6
Reaction score
0
Country
United Kingdom
The flush valve in one of our toilets has broken and I need to replace it. I've done it before and it's not a huge job. Unfortunately, however, the cowboy who installed the toilet has siliconed it to the wall instead of using screws. They also appear to have caulked the gap between the cistern and the commode.

I tried using a bit of brute force and it didn't move a millimetre. Does anyone have any tips on how to resolve this or should I call in a professional? I hate the idea of having to call someone in for what is essentially a simple job but will have to bite the bullet if there's no way I can do it myself.

I've read a few suggestions to hacksaw the silicone. Would any sealant remover help?

Any suggestions would be really appreciated.

I've attached a picture if it helps at all.

IMG_3570.JPG
 
Sponsored Links
Long kitchen knife from either side in a sawing motion and prepare for some graft. I've recently had to remove a couple of shower screens and siliconed to the wall and that wasn't easy, so feel your pain!

I also believe it's a perfectly acceptable method of attaching sinks and cisterns to walls these days. Will certainly make it more secure than screws but not so good for maintenance!
 
I also believe it's a perfectly acceptable method of attaching sinks and cisterns to walls these days.

I disagree. Lazy and bodgy IMO.

Who'd want to attach a sink to a wall anyway? A basin perhaps..
 
Sponsored Links
I disagree. Lazy and bodgy IMO.

Who'd want to attach a sink to a wall anyway? A basin perhaps..

I don't necessarily disagree with you. Just seems to be an accepted method from what I've seen/heard.
 
Sorry, not quite sure I follow. I tried twisting and pulling the top half out but it appears to be lodged and couple of stays have snapped off too it seems so not sure that will work anymore. Do you mean the whole thing can be snapped out?
someone tried unscrewing the wrong way ;):ROFLMAO: they snap easy
 
someone tried unscrewing the wrong way ;):ROFLMAO: they snap easy

Lol I don't think so. Instructions online said to turn it 1/8th anti-clockwise which is what I did. Despite getting it loose though, I couldn't pull the mechanism out. Felt like it wasn't possible or there was some kind of catch I couldn't see. Instructions make no mention of it though.
 
Lol I don't think so. Instructions online said to turn it 1/8th anti-clockwise which is what I did. Despite getting it loose though, I couldn't pull the mechanism out. Felt like it wasn't possible or there was some kind of catch I couldn't see. Instructions make no mention of it though.
Go and buy the new one and it should become immediately obvious how to get the old one out
 
In and out in five minutes complete with my payment...... 7 if I get the full life story.

Fluidmaster slips straight in. Jobs a goodun.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Status
Not open for further replies.
Sponsored Links
Back
Top