Search results

HI, I have a Pyronix euro mini panel and system. When we go to bed we press YES and B. Lastnight the alarm sounder activated about 4 hours after being armed and the only red led I saw on the screen was " zone B" flashing. It didnt accept the normal 4 digit code. We had to put in the engineers...

Hi I have a pyronix euro mini pad which is on exit entry and at night to set system . The engineer programmed it so on a night time we just pressed Yes + b going up the stairs to bed. I am on holiday and my son has accidentally pressed yes + d and he cannot get back to our original setting yes...

Our washing machine has been making an awful noise for 3 weeks. I ve just had the opportunity to take off the top cover and discovered the counter balance seems loose . I’ve tried the 10mm bolts and they are solid . Just a thought I wonder if the balance is depreciating hence why I can’t tighten...

my old Dyson 25 won’t change over to the tools and I think it’s related to the changeover valve . The vacuum works great and filters always changed and cleaned. I’ve enclosed a photo. Can someone tell me if that button should be inside the transparent changeover section ? If it is how do I get...

Hi , I have a washing machine PW6065 and we presently have a F50 error at the end of the cycle and we find the clothes have not been spun properly. However if I accept the F50 error ( ok ) then put it on a spin only cycle it will do this no problem and spin the clothes as normal. The drain pump...

Hi, Does anyone have any experience with connecting a new viessman vitodens 050 to a hive receiver. I’ve posted the book . It’s looking like we connect it to D for opentherm on viessman and hive receiver Connection 1 and 3 but i am not 100%. Help appreciated.

Hi , This morning my DHW is not heating up very well although it is firing the boiler up so it is trying . It gets serviced every year not flushed . Could this be my heat exchanger. Is the same HE used for both central heating and DHW ? The central heating is working fine the problem is just my...

Hi , I need to put a cap/stopper on the rodding pipe ( top) after finding rats were running along here . I bought a 4 inch 110mm and screwed it right up but it’s still slightly too small . Any ideas what would be the size we would need to cap this . We have put into the inner pipe for now but...

Hi, I am looking into getting a Freesat recorder box in the uk however don’t know whether to go for humax or Manhattan. Has anyone had both and could let me know which menu is easier to use for programming recording etc .

I have a Viessman vitodens 100 fitted 2011 and works well. My controller ( vitotrol 100)is unfortunately not controlling the temperature as well as it did. When you turn the small temperature dial the only way now it will work is if you put it up fully on the wireless Vitotrol 100. My question...

Hi, I have just had to change my lemona 8301 out as it was 7 years old and leaking terrible so I replaced it to a 8303 with howdens advice as the 8301 is no longer made . The installation went ok apart from adjusting the feet so the door panel was running true with the rest of my kitchen units...

Hi I’ve recently just had a new alarm system fitted and a remote panel euro mini ( pyronix hikvision ) I need to correct the time . I have the manual but once I put in the 6 figure code don’t really know where to go from here just to alter the time . 9 Once I put the code in I get prompted with...

Just bought a new security light 400W 240v. Got the LUX setting in the middle and this morning when it was daylight it didnt come on. Result I thought. Once it got dark it again didnt activate , however when i walked infront of it for a test it activated and lit up.Result in thought. However now...

Has anyone on here got any experience or advice with baumatic ovens BT2710SS double ovens. My sons just told me when his timer finished tonight it made a pop and now the oven does not come on now . I didn’t realise that a timer would stop the oven working completely and it seems like it’s a...

Ive 3 IP cameras and they work on a remote app a treat. The problem I have is when i connect them to a dvr that I purchased some time ago. The software has a built in "search for cameras" and it can find them but when it tries to add them its changing the IP address of two of them and god knows...

Good evening, See attached photo of a valve on the radiators in my house. The valves have done well as they are 18 years old. I have one radiator making an awful banging noise so this head/valve needs changed asap. I was wondering if I can just replace the heads instead of the entire valve in...

Hi, My son had a seagate HDD 2TB 1TEAP6-500 connected to his xbox one for 8 months as an expansion unit. Hes not using it now as hes upgraded his xbox. He decided to use the HDD as a storage unit for his laptop but the PC will not recognize it as a HDD in my computer. When you connect it you can...

Ive got a Funai HDR - B2735 . Ive recorded the VHS to to HDD no problems but trying to record to DVD i keep getting recording error(fail). The DVD-r is the correct type and blank. Ive not got a clue what to do next unless its just broke and cant record. Was wondering if anyone on here has used...

My shower door rollers need changing , but i was wandering if theres anyway of taking the entire roller catch off. I cant see any retaining screw clamping the roller onto the door but its on tight. The only screw I can see is holding the roller onto the post of the mechanism. Ive attached a...

Wonder if anyone can recommend a hover mower but light in weight. Ive recently purchased a bosch rotek but its so heavy its mad. So I am going to go back to a hover mower or anything that is light in weight but also gives a decent cut. I dont need a cut like a bowling green but for general...