Search results

  1. L

    Hotpoint single fan assisted built in electric oven. fault code F01.

    The oven is showing a fault code F01, after about a minute of running. All heating element resistances test OK. I have replaced the temperature sensor probe with new but fault FO1 is returning. Cheers.
  2. L

    Philips CRT TV not powering up.

    Hi, I have a Philips model 32PW9596/05. It must be about 15 years old now, the price new was £1600 The set is leather bound and still looks great the picture is spot on and I will be sad to see it go. The set powers up with a green indicator light for a few seconds then blue sparking can then...
  3. L

    Electrolux builtin Fridge/freezer Fridge not cooling

    Hi, The problem I have is the freezer section appears to be working ok -24c. But the fridge is not cooling staying around +14C. The appliance is about 8yrs old. The information sticker is missing from inside the fridge compartment. I thought about replacing the thermostat but not...
  4. L

    Electrolux Builtin Fridge/Freezer. Fridge not cooling

    Hi, The problem I have is the freezer section appears to be working ok -24c. But the fridge is not cooling staying around +14C. The appliance is about 8yrs old. The information sticker is missing from inside the fridge compartment. I thought about replacing the thermostat but not...
  5. L

    Baxi combi 30HE temperature sensor problem.

    Hi, My baxi 30HE combi keeps cutting out and indicating a temperature sensor fault. The problem is the female two pin plug is making bad contact with the sensor pins causing an open circuit. I want to replace the plug/lead but having trouble finding part. Does anyone know the name/type of...
  6. L

    Hotpoint BWD12 washer/dryer inner drum removal?

    Hi, The inner drum on my hotpoint washr/dryer has come loose and jamming the drum against the outer tub. I think it may be due to the screws holding the drum onto the spider bracket, either shearing off or coming loose. I want to remove the drum. I can't see how the front of the machine can...
  7. L

    Beko Fridge Freezer Thermostat

    Hi, I want to replace a suspect faulty thermostat in the fridge section of the appliance. The problem I have is the capillary tube from the thermostat appears to be routed out of sight through the thermal insulation in the wall of the fridge housing and not inside the food compartment. There...
  8. L

    BAXI COMBI 105HE LEAKING PUMP

    Hi, My boiler pump has a slight leak due to a failed o ring seal. Can I replace it with a Nitrile o ring of the same size, or will it have to be an original part. Cheers.
  9. L

    Glow Worm Compact 100E Leaking Heat Exchanger Gasket Help.

    Hi, I have a leak from the bottom left hand side of the plate heat exchanger. I suspect the sealing gasket has failed. When the mains water supply is turned off the leak stops. Looking at the service manual the heat exchanger is secured by just two screws. Is it a dificult job to remove the...
  10. L

    Ideal Mini C32 Boiler domestic hot water no central heating?

    Hi, The boiler fires up for dhw in both DHW only, and DHW+CH modes, but no central heating. The green led panel indicator flashes for 1second OFF 1second ON in this condition. When powering the boiler up after switching off the mains supply for a few seconds, the pump will run for about 5...
  11. L

    ZANUSSI ZRB 291W Thermastat capillary tube routing problem?

    Hi, I want to replace the thermostat in the fresh food compartment of the fridge/freezer. The problem is the capillary tube from the stat is routed through the side wall insulation of the appliance and cannot be seen. There are no removable panels that I can see to gain access. I would...
  12. L

    CANDY WASHER DRYER CIW 100 T CONTROL FAULT

    Hi, The machine tripped the ring main rcd a couple of times. I tested the heaters for earth leakage. ( After disconnecting, with a megger appear to be clear ) The machine will now run without tripping the rcd, but when the wash program starts the machine fills as normal but goes into what...
  13. L

    Control Panel full of bluetooth icons?

    Hi, For some reason the Control Panel has been filling up with hundreds of bluetooth icons? The PC is running xp and i have a bluetooth dongle plugged in. How can I stop this, and remove the icons that have been generated. Cheers.
  14. L

    Main Combi 30 HE Leaking pump

    Hi, I have a MAIN Combi 30 HE boiler. The pump housing has a leak from the return pipe connection,top screw. I want to replace the o-rings but cannot find any info on the part numbers for the o-rings? Can anybody give me the correct part numbers. Cheers.
  15. L

    Worcester junior 24i water pump leak.

    Hi, My worcester junior 24i has developed a small water leak. The water is coming from the pump outlet connector. From what i can make out it looks like the Top Hat washer may require replacing. The water appears to be gathering on the top of the pump outlet connector nut. Does anybody Know...
  16. L

    Economy 7 telemeter question ?

    Hi, With economy 7, when the off peak low tariff is switch on via the dual reading telemeter, energising the consumer unit feeding the storage heaters. Will the rest of the house be on the low rate over that period of time, and recorded on the LOW meter reading
  17. L

    CENTRAL HEATING LEAK SEALER.

    Hi, Combi boiler central heating system. I have a number of small leaks on the pipework to various radiators around the house. The system is only three years old, and 10mm copper tube has been used. I was thinking of using fernox leak sealer to cure this problem and save myself a lot if...
  18. L

    Smoke detector problem

    Hi, Having trouble with niusance alarms from mains operated battery backup smoke detector. The detector is installed in a combined open plan kitchen/living room area, at the kitchen end of the room. This apartment is in a four storey building. The detector is mains operated interconnected...
  19. L

    toyota celica 1.8ST Alternator belt tension

    Hi. I have a toyota celica ST (7a-fe 1.8 engine) with a squealing alternator belt,which will require replacement or re-tensioning. Had a look at the setup there doesn't appear to be any belt tensioning device. Will this require the alternator position to be adjusted to tension the belt on this...
  20. L

    Expansion Vessel Question?

    Hi, Just bought an Expansion vessel from screwfix (12l REFLEX). To be fitted to the combi boiler externally, replacing the internal failed EV. The instructions say the unit is filled with nitrogen gas,and if the pressure is too low topup using a nitrogen cylinder. If the EV requires topping...
Back
Top