Search results

  1. davecon70

    Slow filling toilet

    Morning all Appreciate there are a few posts on this but recently I’ve noticed that the cistern is taking ages to fill up. The supply is fully open so it must be the flush valve. When it fills up it’s more like a fine spray than a steady flow of water. It does stop filling though. Any...
  2. davecon70

    How to remove shower hose (behind bath panel)

    Afternoon all Unfortunately the shower hose in the bath is leaking where the shower head attaches. I tried replacing the O ring but that didn’t help, still water pouring out and back down the pipe. Not the end of the world to replace the hose but I had to remove the bath panel in order to...
  3. davecon70

    HELP. Boiler not heating to set temperature.

    Afternoon all. I have an Eco Tec plus 630 boiler which is 5 years old. It’s set up as a system boiler with a megaflo and hive thermostat. It’s been working fine till today after I noticed that the house didn’t feel very warm. I checked the display (no fault codes) but the temperature is 36C to...
  4. davecon70

    Thumb turn euro cylinder lock part II

    Evening all About 8 months ago I posted that I was having issues with a euro cylinder with thumb turn in some bifold doors. Long story short but a locksmith had to replace the cylinder as the turn key refused to turn and then the key got stuck! Fast forward to now and all of a sudden the...
  5. davecon70

    Help! Bathroom radiator not coming on.

    Morning. It’s that time of year when the central heating is turned on for the first time in month and inevitably problems emerge. Initially the bathroom heater was just slow to heat but it’s now stopped completely. It doesn’t have TVRs though you can turn the valves to turn the water off and...
  6. davecon70

    Integrated Bosch dishwasher vs freestanding

    Afternoon all My 2008 integrated Bosch dishwasher has finally died and I have to replace it. I’m considering just going for a freestanding one this time. Apparently they are 60cm vs 59.8cm for integrated but pretty sure it will fit. One question though. My old integrated one was hard wired...
  7. davecon70

    Running water/hissing sound through radiators?!

    Afternoon all. Hope you’ve all had a good Easter. Like many mine was full of house DIY or at least my best attempt. I cannot figure out why my two radiators upstairs are so much noisier than all the rest. It sounds as if water is hissing/running through the when the heating comes on. It’s...
  8. davecon70

    Replacement euro cylinder with thumb turn

    Hi everyone. This is always such a good resource - am hoping to get some advice. I replaced my old cylinder lock on the back door as I’ve not had the keys for years and it’s only 1 star. It’s a 45-45 cylinder though isn’t flush either side- I think I could go 40-40. Either way I ordered a...
  9. davecon70

    Accessing building control plans from 2006

    Hi there I’m in the final stages of having solar panels installed on my dormer roof. I’d like to know before work starts exactly how much weight the roof can support, not how much the solar installers think it can support. I have all the original plans from 2006 and the building regulations...
  10. davecon70

    Integrated fridge door sticking at the top- how to rehang?

    Evening all This has bugged me for years but it seems to be getting worse. Every time I close my integrated fridge door it catches at the top And I now have to push it harder to close. I realise that is doesn’t help having splashback protruding on the side but originally the door closed flush...
  11. davecon70

    Help! Base under shower is rotten.

    Hi there. I posted this in plumbing but not sure that’s the right group. With a few days off this week I decided it was time to be productive and replace the silicone seals around the shower enclosure. No matter how mould resistant the silicone is within a few years it starts to go mouldy...
  12. davecon70

    Help! Plinth under shower is rotten.

    Evening all With a few days off this week I decided it was time to be productive and replace the silicone seals around the shower enclosure. No matter how mould resistant the silicone is within a few years it starts to go mouldy. I’ve done this a few times and the silicone came off quite...
  13. davecon70

    Incorrectly installed Valliant Eco Tec boiler- advice on what to do next?

    Good morning all. Hope you had a relaxing Christmas. I’m looking for some advice on how to proceed with a new Valliant boiler that was incorrectly fitted 3 years ago. Long story short there is not sufficient clearance (there is 80mm as opposed to 180mm as per their guidance) between the boiler...
  14. davecon70

    External insulation advice?

    Evening all I live in an end of terrace 1930s house with solid (pebbledash) walls. Without exaggeration this place is like the artic- cold all the time including the summer when people assume I have aircon . Each winter we wrap up warm and try to heat only the rooms we are in. This year is...
  15. davecon70

    New born baby- heating on all night?

    Evening all This is quite topical given energy prices but any advice would be appreciated! We’ve just brought our newborn baby home and trying to figure out the best way to keep the house warm without our gas bill doubling. I should point out that we are end of terrace in a 1930s house with...
  16. davecon70

    Huge gas pressure drop between meter and boiler. Help!

    Hi everyone On Tuesday I had my 2 year old Vaillant eco tec boiler serviced by the plumber that installed it. He said he could sign it off as the gas at the meter was 20 millibar and at the boiler it was 13.5 millibar. Last year it was 20 millibar for both. As the boiler was under warranty...
  17. davecon70

    No power to underfloor heating and extractor fan.

    After thinking I had successfully fixed a plumbing problem I seem to have created an electrical one. I replaced a Honeywell motorised valve earlier today and re-wired it the same way except for an additional white wire which I had to isolate. The original valve only had 5 wires (no white)...
  18. davecon70

    Boiler not firing up for heating

    Morning all I’ve got a pretty good idea what the issue is but wanted to see if I’m on the right track. It’s a new Ecotec boiler (less than 12 months) and connected to hive. Hot water is working fine but for central heating the boiler does not fire up. Earlier in the year I had the...
  19. davecon70

    Radiator sound- water flowing?!

    Afternoon all The one positive of the lockdown is that it has given me plenty of time to attempt to sort out niggling house problems. Hopefully we won't need the heating on for much longer but I have a bit of a issue with a double radiator downstairs. Whenever the heating is on I can literally...
  20. davecon70

    Repainting mock Tudor beams

    as I’ve got some time on my hands I’m going to repaint the mock Tudor beams at the front of the house. They were all repainted about 6 years ago but started to flake pretty quickly which was a surprise. Perhaps it was the paint and a combination of the sun on the house through our morning. I’m...
Back
Top