Search results

Anyone got any opinion on this? I'm assuming adhesive should be used.

Hi, I plan to box in some radiator & water pipes & then tile over the boxing in my downstairs cloakroom. I previously just had some boxing which was painted & made of plywood. I've had to replace the boxing usin the same plywood as before. My question is, should I stick the tiles to the...

OK will do that in future. I spoke to the person I bought the rad off & he said to use locktight 45. I'm going to take the rad into the shop & he is going to do it for me to save me having to buy some :) I'll get him to swap the tails at the same time & if it still leaks it should prove if its...

Also is there a way of telling whether the rad or the rad tail is the bad item out of the two?? I'm assuming the only way is to change one at a time, but that is a right pain :-( I might see if the shop that sold me the rad has a pressure testing kit.

I have a similar problem. I wouldn't say the joint is slack, but each time I fit it, it has a trickle leak. I have tried PTFE tape (10 turns) and Fernox LX - neither of which have been successful. I have a Thames towel rail. Could it be that the thread in the towel rail is bad? Or that the...

Thanks for the reply - I think your probably right.

I just recieved a new chrome 400 x 600 towel rail. I was told it was a Thames Putnet, but it seems that its actually a Thames Henley. Anyway I assume they are the same. After removing it from the packaging there seems to be a yellowy/orange substance around the top valve threads. I'm...

I had a look online and the only stockists I can see are rscomponents who have discontinued them. They suggested these. Any comments on whether these would be suitable.

Hi, I need to plug a light in behind a bed. Can you get thinner plugs than the standard. So basically something like this http://www.screwfix.com/prods/17967/Electrical-Supplies/Plug-Fuses/White-Plug-13A which isn't as deep so I can get the bed closer to the wall. Cheers.

Well I have some 700 length doors which I can certainly cut the end off, but I was hoping to get a similar door so that I could have a fake door next to the rest. If I have to cut the end the best I can really hope for is a recessed in fill.

So I still haven't managed to get an appropriate cupboard. Its actually 695 in length. Ikea do one which is 700 but its just to long :-( If anyone has any ideas on where I could get a white gloss cupboard door 695 in length I would really appreciate it.

It looks like maurice lay & magnet only do kitchens. I'm after some bathroom cabinets which seem to be shorter than their kitchen equivalents. Thanks anyway.

Hi, I have what looks like popped tape in the celing in one of my bedrooms (see pictures below). Also seems to have been repaired badly in the past in places. Should I get an artexer to re-artex the ceiling or does it need to other attention :? Thanks.

What I was trying to work out was why SF was more expensive than other places like B&Q. I believe its because they are selling a Photoelectric alarm whereas B&Q sell an Ionisation one http://www.diy.com/diy/jsp/bq/nav/nav.jsp?isSearch=true&fh_search=mians+smoke+alarm&selected=products&x=0&y=0...

Thanks for the confirmation. I would like to replace the alarm as its discoloured and we are re-painting the ceiling. If I just need a mains one I'll look in B&Q later today. My local Homebase didn't have any & the one in SF is relatively expensive.

Hi, I have a 3 bedroom house which was built in the late 80's. There is one smoke alarm on the landing ceiling. I know the smoke alarm is connected to the light circuit as whenever I trip the lights the alarm beeps. I assume it has a battery backup as the beeps sound like the battery is running...

Here are the tap connectors I am talking about .... http://www.screwfix.com/prods/77006/Plumbing/Flexible-Hoses/Speedfit-Union-Nut-With-Service-Valve-22mmx-Pack-of-2?cm_re=SEARCHPROMO-_-SPEEDFIT-_-77006#

Hi, I have connected plastic speedfit tap connectors to a bath tap. The plastic pipe then joins to copper pipe. Do I need to earth the taps? If so what do I need to use? Thanks.

Does anyone know who used to supply MFI? Or were they just made solely for MFI?

Hi, So a while back I ordered a fitted an MFI bathroom. I hadn't quite finished before MFI went bust as I started a new project :( Anyway - I have basically got a row of MFI baltic white gloss 700 high wall cabinets. There is a gap of about 10 cm between the left most cupboard door and the...