hive 2

Hi all, I’m looking to replace my current thermostats with Hive. I have ESI ESRTP4+ thermostats in the bedroom and hallway of my flat. With a Logic ESP1 35 combi boiler. When looking at the wiring needed my current thermostats only have 2 wires. NO/ON and COM. Hive obviously needs more...

Hello. I've recently purchased a Hive multi zone self install kit (2 heating zones and hot water system) to replace my Horseman Centaurplus C17 and Horstmann Centaurstat 7 thermostat. I live in a relatively new house with two zones for controlling upstairs and downstairs heating, with separate...

Hi, I've just changed from a EPH thermostat system to Hive, just wondering if anyone could help in matching the wires up for me, are they installed correctly? I've attached 2 photos showing the change I've done between them, thanks

Hi All, Hoping someone could help with this problem. Once I set the date and time on the Hive 2 thermostat, the display stays on that day/time (i.e. date/clock does not increment), meaning I can't set timers for central heating. For example, if I set the date/clock to 17/Oct/2023 09:20 in the...

I recently installed the hive v2 which worked fine. But as soon as I went to remove to thermostat on the wall it all stoped working . Hot water doesn’t fire up. Boiler fires up for 1 min then stops , doesn’t warm the rads up. Maybe I’m doing something wrong. Here’s the stat: do I need to...

Hi all, Sorry to add another thread but I’m looking for some help. I have installed a hive v3 water and heating replacing my old st699. This was prompted by removing the old thermostat that I thought wasnt working and doing nothing to find it was infact setting the heat of the house and plunged...

Can anyone offer any help with my Hive underfloor heating in my kitchen please? I have two hive zones. One for the house and one for the UFH in the kitchen. The UFH has a separate Hive receiver next to the UFH manifold and this is triggered by a Hive thermostat in the kitchen. When I boost...

Hi sorry i’m new here but saw some Great advice. I have a new Hive system but I'm struggling to install, trying to replace an RWB7 (pic 1 and 2) with my Hive controller which is located on first floor but also have an SCR wireless receiver (pic 3 and 4) in garage (floor below) and an RF3 (pic5)...

I hope someone can help, We have a Mitsubishi ground source heat pump system with a water cylinder with a Mitsubishi PAC-IF013B-E Unit on the front. Downstairs we have a wireless Danfoss TP500Si thermostat which talks to the Danfoss RX1 single channel receiver also attached to the unit. There is...

Hi All, I have been given a Hive 2 With Dual Channel Receiver. I would like to use it with my Worcester Bosch Greenstar Heatslave ii 18/25 After reading around online I am aware that the single receiver version should be used for Combi boilers. However it can also be seen a Dual Channel...

Another Hive question sorry! I've searched the forums and can't find something quite like my question... I have just got a Hive 2 heating (single) and installing on Ariston E-Combi Evo (with a mechanical clocker/timer) This is what it looks like... Is it as simple as connecting 1 to L 2 to...

Hello, I live in the UK and my home has a oil fired boiler which is gravity fed. I bought a hive dual channel receiver as my home has a separate hot water tank. It turns out that the switching for the hot water is within the boiler outhouse so I will only be able to set up for a single channel...

Just added some Hive TRV valves to my Hive system the other day, and noticed I could not control them from the Hive website at https://my.hivehome.com/ like I could with the mobile app. Below is what I get: Clicking on a TRV... Hive-TRV-Dashboard by eveares posted 18 Sep 2019 at 10:31 PM...

Hi I am attempting a self install with Hive with an Ideal Combi I will isolate all electrics and want to make sure that I am doing things correctly before I do the diy work at home at get stuck. Is my wiring diagram correct below? Can I use the mains into the boiler and connect off the same...

Hi all, I'm hoping someone can help identify the wires under the combi boiler. There was once hive installed however the previous owner has taken the reciever and install a standard danfoss thermostat. This is how it has been left. 15543993042235156073894454745445 by Matt Bezant posted 4 Apr...

Hi everyone, new guy over here. I'm ok with electrical DIY, but plumbing (and central heating system) is not my strong side, so sorry in advance if I write something stupid. Now to the issue. I wanted to make my home a bit smarter, so I bought Hive Active Heating - Smart Hive Thermostat &...

Another hive thread! Hi all wanting to replace my current digital timer/thermostat with a hive V2. I have a Worcester Bosch Green Star 30si Combi boiler. My current setup is as shown in the attached image. The thermostat is in my landing and boiler is in the garage. The boiler connects to a...

good morning. I’m after so information on wiring my Hives up. I’ve just bout the active heating and extra hive We have 2 thermostats to replace. In my current thermostat they only have 4 wire. L, N, E and a L when the heating is called (CH on?) I’ve put the wires to the corresponding pins...

Hi All, I setup Hive 2 a while back for downstairs heating and hot water and it works perfectly. This meant that my upstairs rads were still controlled by a danfoss tp5000 programmable room thermostat in the bedroom. Ive been out and bought the multizone kit for hive with the plan to replace...

Hi all, I have a Worcester Greenstar 24i Junior combi boiler and I want to fit a Hive 2 heating and hot water thermostat. I realise that I've bought the wrong version but I'd rather make do with what I have instead of having to send it back to get the heating only version. I believe this is...