Plasterboard ceiling that has water damage in one place.
Better to board over or replace with new board. One section has crumbled away.
Attic has the usual fibreglass insulation and this strange stuff between the joists that's like a cross between wool and ground up cardboard.
I've had the artex...
Hi there
I wonder if someone here can give me some advice / help on this. In our external wall, the brickwork below the render is in poor condition. You will see in the pictures attached.
One side backs onto the garden, the other is sitting below the decking.
The first question I have is...
Hi everyone,
My 1925 house is having some issues on a chimney breast in our dining room. When we moved in we pulled down the wallpaper in there, including on the chimney breast. The wall had been repaired before a long time ago and was uneven so I applied a skim coat of joint compound to level...
Hey guys,
so we were taking down the plaster in our downstairs bathroom to put a sink as there was some previous damage and we got a bit doubtful about if it’s normal plaster or asbestos cement plaster or some sort.
we aren’t experienced at all with what’s asbestos and what’s not but we found...
Hi, I'm in the process of getting my bathroom re-modelled and bits of the ceiling have dropped off. I have attached a pic of the plasterboard. I have ordered a testing kit but it won't arrive for a few days. My main concern is that due to the age of the house that it might contain asbestos. Is...
I'm considering putting in an offer on a house but most rooms have cracked sections around the edge of the ceiling where the plasterboard seems to be pulling away from the walls. The property is a 3 storey terraced built in 2002. A couple of the rooms also have floor to ceiling cracks down the...
I have got installed new stair and now need to get ceiling up. I have no idea from where to start with batten.
I have attached photos below. Any advise would be appreciated
Hi guys, so I tried my hand at skim coating with gyproc skim Coat (Ireland’s equivalent to thistle multi finish I believe). Large sections are pretty decent.
While I’m sure there’s been worse first attempts than this one I do have blemishes and some scruffy spots that I failed to recognise...
Removed shot plaster which was sand/cement. Below it is a piece of wall which was always having issues - paint was always coming off so I thought to remove some of that at the same time and re do with sand cement and finish. However unlike most of the other walls in the house this has a mass of...
Someone told me that you can’t actually use the gyproc Skimcoat stuff over top of the gyproc joint compound (multipurpose) because it’s sort of incompatible, something about the skimcoat being a veneer plaster and putting over joint compound is wrong. He said skim the whole surface with joint...
Hi all. Please help me clear up confusion from google and youtube.
the job is small, finishing a relatively small wall area for an understairs WC but has plenty of inside corners
Iv starting the jointing process and taping using joint compound and while i feel the finish is a little rough (im...
Hi. I need to replace a section of ceiling plaster damaged by a leak. Before I cut it out just wanted to check it's safe (i.e. no asbestos). Pics attached, hope they're clear enough. Doesn't really look fibrous but darker in colour than other plasterboard materials I've come across and not sure...
This seems to be a subject that has come up so many times. Moving into an 1850s cottage the bathroom ceiling is artex covered lathe and plaster, the ceiling is water damaged from the roof leaking (will be fixed before I start anything) so it has to come down, I also want spots and a ceiling fan...
Apologies for the thickest question of the day ... but if we remove these patio doors what is likely to be left behind ... will it be bare brickwork? And what is the best way to smooth this gap.
The wall is the same size on both sides of the door.
Cheers!
Hi had my kitchen ceiling skimmed about 5 weeks ago, over the top of the old ceiling which was just in a bad state. It was boarded originally. Everything has been fine, until yesterday, I noticed a yellow stain in one of the corners. Ironically it’s the corner than dried out first after...
I have a leak in my kitchen ceiling. I am worried if this is asbestos-containing material. I am looking to get a professional to test it but in the mean time I would like to know if I can go in there and make food/drink. These are the pictures:
Thanks for reading. Any help is appreciated.
Hi,
I have some heating pipe in copper which sit on a vertical chase through my internal brickwall.
How would you normally close it dowm? Is there any special product you use to avoid any future crack?
I was thinking to use gypsum bonding to fill up the chase on the brick and then some joint...
I am buying a detached house, circa 1911 to 1926 (not on the 1911 OS map, is on the 1926).
Survey identifies empty cavity wall (rather than solid wall) original plaster internally and original lath ceilings. It suggests the exterior render is original, looks ok, however has some loose sounding...