tado

Before I had my new combi boiler and Tado installed I had an older system with a separate water tank. If that old boiler ever had issues I could simply use the immersion heater in the water tank and still have hot water. Now that my new combi boiler has Tado connected, as far as I can see I...

I was wondering what an efficient way of setting up bypass radiators is? I have 9 rads in total, including 2 bathroom towel radiators - the non-bathroom ones are all fitted with a Tado SRV. My boiler (Vitodens 100-W B1KF) will provide a min output of 3.2kw when heating. So I'm assuming a bypass...

Hi all, I want to move from nest to tado but can't find anything to help me swap the heatlink wirering to the tado EK. I also need help with jumper position. Has anyone done this and able to share diagram. Thanks in advance.

I'm about to get a Viessmann 100-W B1KF and plan to have it hooked up to a Tado smart thermostat system. I'm assuming that as the Tado supports OpenTherm, to get that benefit, I should ask the installers to make sure it is in the operation mode highlighted below (from the 4 available)? I've...

I'm looking to get a new combi boiler fitted soon, likely a Viessmann. The combi boiler will be servicing about 9 radiators (including 2 towel radiators) and 2 showers in a 3 bed flat. I'd like a smart thermostat system for this, but am a bit flummoxed by the options especially the zoning...

Hi All I have had a search through previous posts and google, but everything I find seems to get me more confused. I have just had a new Vaillant boiler fitted, an ecoTEC plus 838 combi. It is just the boiler at present, operated by the controls on the front only. My plumber is offering to...

I installed a Wireless starter kit last night however, we only have hot water and no central heating I followed the instructions from the Tado app for the install. I bridged the connections where the old thermostat was removed. The only way I could get the heating to work was to reinstall the...

Ive opened a can of worms by researching the heating system for our refurbishment. We are having a central heating system installed. The proposed boiler is a Vaillant ecoFIT pure (think 618 but not definite). The heating will have 3 underfloor heating circuits for two zones. Builder intends...

I have just bought a house with a Vaillant ecoTec 637. The previous owner had some terrible Honeywell system installed but took all the controllers. So I can’t control the system, and in particular I can’t get the hot water on, no matter what I do. I had previously used a tado system, so I have...

2530554F-5F90-441C-B95A-748E1202E6E3 by Commalex posted 2 Apr 2021 at 10:44 PM This is the BR1 4 wires a Live, Neutral (which I parked in the Tado) then Lx l1 and l2 ive wired up the L1 and Lx to com and N0 on Tado connections. NC is empty. glow worm cxi30 ultracom is set to always on for CH...

I’ll try to keep this as short as possible! Basically the timer has died on my Ecotec plus 831 combi and rather than just replace it with similar I was thinking now maybe the time to go smart and get something that can help my heating system run more economically as we’re off grid so run off...

Good afternoon, I am hoping somebody can give me some advise on the correct way to install my new Tado kit. I currently have a Baxi Duo-Tec Combi Boiler with an intergrated timer and a wired Honeywell T6360B1028 thermostat. I bought the starter kit thinking the thermstat could be wired in to...

The receiver installed in my boiler (Baxi Duo Tec HE A) is currently a Salus BC600RX. Please see attached a photo of said receiver (front and back) and the wiring of. Also attached are photos of how I’ve wired in the Tado wireless receiver as advised on the Tado website for a Baxi Duo Tex HE...

Hoping somebody can help as I'm not too clued up in these things. I moved in last year to a house that has a Vaillant boiler with radiators upstairs. The rads upstairs are controlled by a Timeguard room stat and a Horstmann Centaurplus C27 programmer. The C27 is programed for set times of the...

Hi, this is my first post, so pardon my ignorance. I've not been too long at this new bungalow for my parents, there is a Danfoss Randall 4033 timer for Hot Water and Heating (click the link for pictures: https://drive.google.com/drive/folders/1zECdyqCUI5sXfGqKD2XgW1zp8M-1zDLu?usp=sharing). It...

I am attempting to self install my Tado thermostat. Having removed the cover on my existing Potterton termostat I am presented with the following (see attached screenshot). The Tado guide says label the wires and connect wire 2, 1 and 4. On my unit I have no wire in terminal 1. Any help would be...

Afternoon, Does anyone know if you can fit a tado radiator valve on this radiator, there’s a load of adapters I just cant make them fit.

Hi, I have just replaced my Danfoss TP9000 programmer and TS2 sensor with a Tado smart thermostat and extension kit. Replacement was easy enough with the online help guru. The smart thermostat replaced the overheat sensor in the hall and the extension kit is in with the boiler. All was...

Hi, I have brought a Tado smart thermostat and currently attempting to install it. I currently have a Worcester Greenstar i boiler connected to a Honeywell BDR91 which wirelessly links to a Honeywell EHE0200361. (All images attached) I have entered this information into the step by step guide...

Hi, I'm trying to replace our current ESi thermostats with Tado. Our heating is multi-zoned with boiler+external controller+thermostat at zone 1 and hot water cylinder+thermostat upstairs at zone 2. I dont think the cylinder is related to the thermostat upstairs but using it for location...