water

Hi, I've fitted a metal Kaldewei bath with a Bristan Quest mixer tap. The tap holes were pre-drilled and the centres are fine. I tested the electric shower above and water leaked through the base of the tap and through the holes, onto the floor. The issue is that the holes in the bath are 35mm...

Renovating an old terraced property. Not sure what to do with these unsightly pipes in what will become a utility room. If I boxed them in my joinery skills might make it look worse. Thinking of painting them white which may look ok against a good old magnolia wall. Has anyone got any tips on...

Hi, I was wondering if anyone might be able to help with this! We have recently had a wall built around our front garden. In the front garden, there are two manhole covers - one rectangular and one circular. The rectangular one appears to be for waste water from our property? This being the...

Hi all - just after some advice. I am working away and leaving my UK house empty for a while. I have taken appropriate insurance cover for this, but one of the terms requires that either the heating be left on constant at 15 degrees C between Oct and April OR the main water stopcock is turned...

Hi. New member here. I bought a flat last year, in a converted pub on a very long lease. The developer went bust and the conversion was finished by contractors working for the new freeholders - a firm of solicitors. The development began in 2015. The main pub building has been split into three...

Dear All, First of all, I hope you are having a lovely day! Thank you in advance for stopping by and reading this. I realise my title may sound a little odd. I am clearly no expert, and my husband is actually doing the DIY for a mini kitchen makeover. He is very skilled and has already...

Afternoon I will need to turn the hot water off whilst fitting a new cloakroom suite. I tried to locate an isolation valve from o the cold supply to the tank, and it looks like it's this which has no handle. Looking at the pic, can anyone advise what sort of handle is required? I'm guessing...

Hi everyone, Recently we have been having problems with our washing machine and need to buy a new one. We need to turn off the water supply going to the washing machine but it seems like someone has broken the shut off valve tap/switch (see pictures). Would it be possible to just buy a new...

I wonder if any one can help me. I live in a rented house. I went to run my children a bath tonight I turned on hot tap and heard a screeching sound coming from kitchen downstairs and the sound of water. I went down stairs to check and the hot tap in kitchen was screeching and water was coming...

Hi all, Im sure this has been raised in the forum before but ive had a look and am currently a bit stuck. Once the hot water has been on and the cold water pipe in the attic is filling the storage tank again the pipe leading to it is making a very loud squealling noise. Ive been in the attic...

I think whatever tells it there's enough water stopped working. The washing cycles seem to be working fine. I tried resetting the washing mashine. That didn't fix anything. Water doesn't overflow, I think the the draining cycle stops that from happening. If I switch the power off, the water...

Just wondering what the regulations were for how close a socket could be to a sink in the year 2000. The photo below is from a kitchen at a commercial office building that was likley built around the year 2000, the edge of the socket is only about 100mm-150mm away from the edge of the sink ...

This has been going on intermittently for some time, but now is almost every time a cold water tap in the house is turned on. Water bursts out of the tap in stop start gushes, accompanied by quite loud gugg, gugg, noises that are not the banging pipes noises described by some members. It takes...

Hi, Last year I moved into a new property and had a full 'buildings survey' to detect any problems. However the one room the inspector/surveyor could not inspect was stacked floor to ceiling with boxes. The previous owner had stacked all their moving out boxes in this area which conveniently...

We bought a BOSCH TDS3525GB Sensixx B35L Iron and it leaks everytime we try to use it? We fill the water (not over full) for steam, and as the Iron warms up it leaks water out of the base holes all over the stand/appliance and all over the floor? This obviously (as its for steam), is very hot...

Water softeners are one of the most confusing things to research on the web in my opinion. People who sell them drop straight into that snake oil selling mode even though they are valid appliances which do have genuine value. I have recently had one installed; a Monarch Midi. I have learned or...

Any ideas what this could be? Over past week, we have had a pressure drop from (mixer) Tap in Bathroom? Have checked with Water board, and nothing out of the ordinary and they asked me to check the water pressure coming into the house via downstairs Kitchen Cold tap. All seems normal... it...

Does anyone have any experience of this? Had this last week and remove some of the parts at the bottom and the filter and it "seemed" to work again for a while.. Last night, it came on again with E:15 error and some of the water leaked out of the front? This is obviously a draining issue.. as...

Is this a Genius or Simply Dumb way of heating a paddling pool up? Pool Heater by eveares posted 7 Aug 2016 at 11:53 PM

I'm currently trying to complete bringing water into my garage and cant seem to find an answer as to what is best practice. Bringing 20mm MDPE up the ouside of my garage wall, is it best to use a 90bend bringing the MDPE through the wall and then use a reducer to change over to 15mm copper pipe...