Hi all,
I'm going to be attempting to renovate our bathroom in a months time. It's a 90s house and most internal walls are stud and plasterboard.
My plan was to remove the tiles as cleanly as possible from the plasterboard, and presuming I didn't destroy it in the process just to re-tile on the existing plasterboard.
I have had a little bit of an exploratory look behind the tiles and I am wondering if it is actually worth me wasting my time trying to remove these tiles and I would be better off just ripping down all the walls and starting again.
From the hole I can see the plasterboard is covered in a blue/green material which I presume is the moisture resistant covering. However, this material is pretty much coming away with the tile adhesive and I strongly suspect that when I scrape off all the adhesive, most of the blue/green stuff is going to go with it.
Would I be wasting my time just trying to remove the tiles?
Thank you
I'm going to be attempting to renovate our bathroom in a months time. It's a 90s house and most internal walls are stud and plasterboard.
My plan was to remove the tiles as cleanly as possible from the plasterboard, and presuming I didn't destroy it in the process just to re-tile on the existing plasterboard.
I have had a little bit of an exploratory look behind the tiles and I am wondering if it is actually worth me wasting my time trying to remove these tiles and I would be better off just ripping down all the walls and starting again.
From the hole I can see the plasterboard is covered in a blue/green material which I presume is the moisture resistant covering. However, this material is pretty much coming away with the tile adhesive and I strongly suspect that when I scrape off all the adhesive, most of the blue/green stuff is going to go with it.
Would I be wasting my time just trying to remove the tiles?
Thank you
