Messed up my calculations. Just started tiling the splash-back and realised one of the back boxes is not centered with the wall unit - and can be seen easily as being off with the lines of the tiles compared to the socket on the right:
As you can see white socket seems centered pretty good but black cooker socket is off by about 2cm.
Do I have any chance of moving it to the left by 2cm considering there are 3 cables coming in as well as it being inline with the cooker terminals down below.
If I move it to the left this means I have to cut the bottom right corner of the back box to make room for one of the cables.
Of course I also have to replace that tile I cut
Thanks.
As you can see white socket seems centered pretty good but black cooker socket is off by about 2cm.
Do I have any chance of moving it to the left by 2cm considering there are 3 cables coming in as well as it being inline with the cooker terminals down below.
If I move it to the left this means I have to cut the bottom right corner of the back box to make room for one of the cables.
Of course I also have to replace that tile I cut
Thanks.