Can anbody direct me to a thread or site " dont want to waste professional help on a should be simple task "which might show the following :
I am installing 2 halogen 12v lights in the upstairs bathroom IP64 with a transformer no earth and a separate inline fan located in the loft 240V which i would like to operate separately using a DP pull cord located in the bathroom .. the lights are turned on and off using a one way switch in the bedroom .. Adam was so kind to reply and tell me i might have a few problems because i have tried to wire the whole thing up but running it all on a normal 3amp plug to test it worked fine ... BUT when i connected it to my consumer unit the rcd would always reset .... " would be great to have some sort of basic wiring Diagram so i can follow it and see where i possile went wrong ...
>
I am installing 2 halogen 12v lights in the upstairs bathroom IP64 with a transformer no earth and a separate inline fan located in the loft 240V which i would like to operate separately using a DP pull cord located in the bathroom .. the lights are turned on and off using a one way switch in the bedroom .. Adam was so kind to reply and tell me i might have a few problems because i have tried to wire the whole thing up but running it all on a normal 3amp plug to test it worked fine ... BUT when i connected it to my consumer unit the rcd would always reset .... " would be great to have some sort of basic wiring Diagram so i can follow it and see where i possile went wrong ...
>