Hey guys, i recently decided that it would be a good idea to replace my existing ceiling rose (including the flex) because it has become very discolored and the wire that goes down to the light is an old type, the ones with like 2 wires running down to the light twisted - and the casing on the wires has worn away and left exposed wires
So anyway, i turned the power off and unscrewed the cover of the rose, everything looked simple enough, i measured the width of the rose and went down to homebase to buy a new one.
Heres the problem though, it seems that there are lots of different sized roses and i can't find one thats the same size.
Is this normal? I just assumed that all roses would be more or less the same size fitting.
I don't really fancy making a bigger hole in the ceiling just to accomadate a bigger rose.
Also the actually layout on the rose is different from ones i see, my rose is 4cm wide without the cover on.
Any ideas guys because i'm kindof stuck!
So anyway, i turned the power off and unscrewed the cover of the rose, everything looked simple enough, i measured the width of the rose and went down to homebase to buy a new one.
Heres the problem though, it seems that there are lots of different sized roses and i can't find one thats the same size.
Is this normal? I just assumed that all roses would be more or less the same size fitting.
I don't really fancy making a bigger hole in the ceiling just to accomadate a bigger rose.
Also the actually layout on the rose is different from ones i see, my rose is 4cm wide without the cover on.
Any ideas guys because i'm kindof stuck!