cold feed washing machine

[helptavner]

as they all seem to just have this - i have hot and cold supply
is there some sort of cap that screws on the end of the valve shut off

what does it look like please??!!

picture please os would it be best to fit a compression stop end?! and cut the tap off?!

 

[helptavner]

http://www.diytools.co.uk/diy/Main/sp-64-12435-119443-stop-end-brass-cap:-3-4.asp

 

[seco services]

Don't forget to put a 3/4" rubber washer in the cap end.

 

[D_Hailsham]

http://www.diytools.co.uk/diy/Main/sp-64-12435-119443-stop-end-brass-cap%3a-3-4.asp

£24.99 for a stop end!! I think the decimal point has moved one place to the right!

 

[TicklyT]

http://www.diytools.co.uk/diy/Main/sp-64-12435-119443-stop-end-brass-cap%3a-3-4.asp

£24.99 for a stop end!! I think the decimal point has moved one place to the right!

More like one place to the left - the note at the end of the description says that's for 10 Kilogrammes of the things!

Doesn't sound quite so bad for a pack of 10 - if you have a use for the other 9

 

[D_Hailsham]

http://www.diytools.co.uk/diy/Main/sp-64-12435-119443-stop-end-brass-cap%3a-3-4.asp

£24.99 for a stop end!! I think the decimal point has moved one place to the right!

More like one place to the left - the note at the end of the description says that's for 10 Kilogrammes of the things!

Doesn't sound quite so bad for a pack of 10 - if you have a use for the other 9

I didn't see the 10kg!

However I doubt if they weigh 1kg each - more like 50g - so there would be 200 in the pack; a unit cost of 12.5p.