- Joined
- 27 Feb 2021
- Messages
- 61
- Reaction score
- 2
- Country
Consider a scenario with an all-RCBO CU with no incomer, e.g. the main switch external because an enclosure with switch+SPD has been used, and all-RCBO means there's no RCCB.
How to connect a L tail to the busbar? In all my years I've never come across a device to do that.
I've found this:
which would work, but has the unfortunate features of being labelled neutral and only rated at 63A
Anyone got any suggestions?
How to connect a L tail to the busbar? In all my years I've never come across a device to do that.
I've found this:
which would work, but has the unfortunate features of being labelled neutral and only rated at 63A
Anyone got any suggestions?
Last edited: