copper bending

[Bobajob123]

Does anyone have instructions for copper bending with a benders... i had a sheet but lost it....

 

[mickyg]

have you tried youtube?

 

[Bobajob123]

No mate... tryin to see if anyone had the sheet... think it was a iphe sheet i got

 

[mickyg]

ok fair enough. What do you need to know then? Its pretty straight forward..You could always try the Literature section on the UK copperboard website, plenty of useful stuff in there.

 

[mickyg]

Lucky for you I've got not much to do at the moment

http://www.ukcopperboard.co.uk/literature/pdfs/Installation-Tips/Bending-machine.pdf

 

[Bobajob123]

lovely cheers bud

 

[kirkgas]

bobajob, i have a couple on work comp will post them when i go back to work on monday

 

[DeltaT]

This is also a very good method;

http://www.ciphe.org.uk/Global/Student Study Section/Copper pipework bending.pdf

 

[neds]

I always use McKeowns table. Perfect every time. Just memorise the sizes for the bends and thats all you will need. Any other types of bend come from experience.

 

[DeltaT]

This is NOT the way to do it..........

http://www.associatedcontent.com/video/272679/how_to_bend_copper_pipes.html?cat=15

 

[ChrisR]

This is NOT the way to do it..........

But it must be right it's on the internet